A sustainable approach for the degradation kinetics study and stability assay of the SARS-CoV-2 oral antiviral drug Molnupiravir.

Molnupiravir (MPV) is the first direct-acting oral antiviral drug that effectively decreases nasopharyngeal infections with SARS-CoV-2 virus. The stability of MPV was tested by subjecting the drug to various stress conditions. The drug is liable to oxidative, acidic, and alkaline degradation and showed significant stability against thermal degradation. Mass spectrometry identified the degradation products and guided suggestion of the degradation patterns. Interestingly, while inspecting the UV-absorption spectra, we observed no absorbance at 270 nm for the products of the three degradation pathways (c.f. intact MPV). Direct spectrophotometry seemed a solution that perfectly fit the purpose of the stability assay method in our case. It avoids sophisticated instrumentation and complex mathematical data manipulation. The method determined MPV accurately (100.32% ± 1.62) and selectively (99.49% ± 1.63) within the linear range of 1.50 × 10-5-4.0 × 10-4 M and down to a detection limit of 0.48 × 10-5 M. The proposed method is simple and does not require any preliminary separation or derivatization steps. The procedure proved its validity as per the ICH recommendations. The specificity was assessed in the presence of up to 90% degradation products. The study evaluated the greenness profile of the proposed analytical procedure using the National Environmental Methods Index (NEMI), the Analytical Eco-Scale, and the Green Analytical Procedure Index (GAPI). The three metrics unanimously agreed that the developed procedure results in a greener profile than the reported method. The method investigated the degradation reactions' kinetics and evaluated the reaction order, rate constant, and half-life time for each degradation process.

Predictive stability, novel HPLC-MS analysis and semi-automatic compounding process for the emergency implementation of a production line of pancuronium in injectable solution.

During the early months of the COVID-19 pandemic, the international medical product supply chain was tight, causing breaks in the availability of neuromuscular blocking agents essential for the treatment of patients in intensive care units. The present study describes the pharmaceutical development of an injectable 2 mg/mL solution of pancuronium bromide (PC) in a very short lapse of time. The sterile solution was compounded into a good manufacturing practice grade A clean room, filtered (0.2 µm) and filled into 10 mL type I glass, manually sealed with bromobutyl rubber stoppers. A novel HPLC-MS stability indicating method for pancuronium quantification and its degradation product was developed and validated. This fast, sensitive and straightforward method was used to study the stability of the formulation using a semi-predictive method, enabling a very fast attribution of a temporary shelf-life, which was confirmed by a classic prospective stability study. The production line and the analytical tools set-up were performed in six weeks and the semi-predictive stability study was conducted in 90 days, allowing us to predict a shelf life, which was successfully confirmed by prospective study. In conclusion, using innovative methods, we were able to rapidly overcome the shortage of a critical drug.

Stability of Drugs Stored in Helicopters for Use by Emergency Medical Services: A Prospective Observational Study.

STUDY OBJECTIVE: Drugs stored in rescue helicopters may be subject to extreme environmental conditions. The aim of this study was to measure whether drugs stored under the real-life conditions of a Swiss helicopter emergency medical service (HEMS) would retain their potency over the course of 1 year. METHODS: A prospective, longitudinal study measuring the temperature exposure and concentration of drugs stored on 2 rescue helicopters in Switzerland over 1 year. The study drugs included epinephrine, norepinephrine, amiodarone, midazolam, fentanyl, naloxone, rocuronium, etomidate, and ketamine. Temperatures were measured inside the medication storage bags and the crew cabins at 10-minute intervals. Drug stability was measured on a monthly basis over the course of 12 months using high-performance liquid chromatography. The medications were considered stable at a minimum remaining drug concentration of 90% of the label claim. RESULTS: Temperatures ranged from -1.2 °C to 38.1 °C (29.84 °F to 100.58 °F) inside the drug storage bags. Of all the temperature measurements inside the drug storage bags, 37% lay outside the recommended storage conditions. All drugs maintained a concentration above 90% of the label claim. The observation periods for rocuronium and etomidate were shortened to 7 months because of a supply shortage of reference samples. CONCLUSION: Drugs stored under the real-life conditions of Swiss HEMS are subjected to temperatures outside the manufacturer's approved storage requirements. Despite this, all drugs stored under these conditions remained stable throughout our study. Real-life stability testing could be a way to extend drug exchange intervals.

First-in-class trispecific VHH-Fc based antibody with potent prophylactic and therapeutic efficacy against SARS-CoV-2 and variants.

SARS-CoV-2 and its variants have persisted in this ongoing COVID-19 pandemic. While the vaccines have greatly reduced the COVID-19 cases, hospitalizations, and death, about half of the world remain unvaccinated due to various reasons. Furthermore, the duration of the immunity gained from COVID-19 vaccination is still unclear. Therefore, there is a need for innovative prophylactic and treatment measures. In response to this need, we previously reported on the successful computer-aided development of potent VHH-based multispecific antibodies that were characterized in vitro. Here, we evaluated in vivo efficacy and safety of the lead trispecific VHH-Fc, ABS-VIR-001. Importantly, our data showed that ABS-VIR-001 treatment prevented SARS-CoV-2 infection and death when provided as an intranasal prophylaxis in a humanized ACE-2 mouse model. In addition, ABS-VIR-001 post-exposure treatment was shown to greatly reduce viral loads by as much as 50-fold. A detailed panel of metabolic and cellular parameters demonstrated that ABS-VIR-001 treatment was overall comparable to the PBS treatment, indicating a favorable safety profile. Notably, our inhibition studies show that ABS-VIR-001 continued to demonstrate unwavering efficacy against SARS-CoV-2 mutants, associated with key variants including Delta and Omicron, owing to its multiple epitope design. Lastly, we rigorously tested and confirmed the excellent thermostability of ABS-VIR-001 when heated to 45 °C for up to 4 weeks. Taken together, our study suggests that ABS-VIR-001 is an efficacious and durable prophylaxis and post-exposure treatment for COVID-19 with promising safety and manufacturability features for global distribution.

Favipiravir (SARS-CoV-2) degradation impurities: Identification and route of degradation mechanism in the finished solid dosage form using LC/LC-MS method.

Favipiravir finished dosage was approved for emergency use in many countries to treat SARS-CoV-2 patients. A specific, accurate, linear, robust, simple, and stability-indicating HPLC method was developed and validated for the determination of degradation impurities present in favipiravir film-coated tablets. The separation of all impurities was achieved from the stationary phase (Inert sustain AQ-C18, 250 × 4.6 mm, 5-µm particle) and mobile phase. Mobile phase A contained KH2 PO4 buffer (pH 2.5 ± 0.05) and acetonitrile in the ratio of 98:2 (v/v), and mobile phase B contained water and acetonitrile in the ratio of 50:50 (v/v). The chromatographic conditions were optimized as follows: flow rate, 0.7 mL/min; UV detection, 210 nm; injection volume, 20 µL; and column temperature, 33°C. The proposed method was validated per the current International Conference on Harmonization Q2 (R1) guidelines. The recovery study and linearity ranges were established from the limit of quantification to 150% optimal concentrations. The method validation results were found to be between 98.6 and 106.2% for recovery and r2  = 0.9995-0.9999 for linearity of all identified impurities. The method precision results were achieved below 5% of relative standard deviation. Forced degradation studies were performed in chemical and physical stress conditions. The compound was sensitive to chemical stress conditions. During the study, the analyte degraded and converted to unknown degradation impurities, and its molecular mass was found using the LC-MS technique and established degradation pathways supported by reaction of mechanism. The developed method was found to be suitable for routine analysis of research and development and quality control.

Thermostable vaccines: an innovative concept in vaccine development.

INTRODUCTION: Vaccines represent he most common and safer ways of combating infectious diseases. Loss of potency owing to thermal denaturation or degradation of almost all the vaccines necessitates their storage, transportation, and final dissemination under refrigerated conditions. However, maintenance of a continuous cold chain raises the costs of vaccines significantly. A large number of life-saving vaccines are discarded before their application owing to exposure to sub-optimum temperatures. Therefore, there is a pressing need for the development of a thermostable vaccine with a long shelf life at ambient temperature. AREAS COVERED: A literature search was performed to compile a list of different vaccines, and their storage and handling conditions. Similarly, a separate list was prepared for different coronavirus vaccines. A literature survey was also performed to look at different approaches undertaken globally to address the issue of the cold-chain problem. We emphasized the importance of yeast cells in the development of thermostable vaccines. In the end, we discussed why thermostable vaccines are required, not only in resource-poor countries but also for resource-rich countries . EXPERT OPINION: Temperature change can severely impact the stability of various life-saving vaccines. Therefore, there is a pressing need for the development of thermostable vaccines with a long shelf lives.

Biochemical and Immunological implications of Lutein and Zeaxanthin.

Throughout history, nature has been acknowledged for being a primordial source of various bioactive molecules in which human macular carotenoids are gaining significant attention. Among 750 natural carotenoids, lutein, zeaxanthin and their oxidative metabolites are selectively accumulated in the macular region of living beings. Due to their vast applications in food, feed, pharmaceutical and nutraceuticals industries, the global market of lutein and zeaxanthin is continuously expanding but chemical synthesis, extraction and purification of these compounds from their natural repertoire e.g., plants, is somewhat costly and technically challenging. In this regard microbial as well as microalgal carotenoids are considered as an attractive alternative to aforementioned challenges. Through the techniques of genetic engineering and gene-editing tools like CRISPR/Cas9, the overproduction of lutein and zeaxanthin in microorganisms can be achieved but the commercial scale applications of such procedures needs to be done. Moreover, these carotenoids are highly unstable and susceptible to thermal and oxidative degradation. Therefore, esterification of these xanthophylls and microencapsulation with appropriate wall materials can increase their shelf-life and enhance their application in food industry. With their potent antioxidant activities, these carotenoids are emerging as molecules of vital importance in chronic degenerative, malignancies and antiviral diseases. Therefore, more research needs to be done to further expand the applications of lutein and zeaxanthin.

Editorial: First Approval of the Protein-Based Adjuvanted Nuvaxovid (NVX-CoV2373) Novavax Vaccine for SARS-CoV-2 Could Increase Vaccine Uptake and Provide Immune Protection from Viral Variants.

The Nuvaxovid™ (NVX-CoV2373) Novavax vaccine is a recombinant spike (S) protein nanoparticle vaccine combined with the Matrix-M adjuvant. On December 20, 2021, the European Commission of the European Union (EU) granted conditional marketing authorization for the Nuvaxovid™ (NVX-CoV2373) Novavax vaccine, following recommendations from the European Medicines Agency (EMA). On February 3, 2022, this vaccine was granted conditional marketing authorization (CMA) in Great Britain by the Medicines and Healthcare Products Regulatory Agency (MHRA) for use in individuals ≥18 years. The two vaccine components elicit both B-lymphocyte and T-lymphocyte immune responses to the S protein of SARS-CoV-2. The full-length S protein in this vaccine has common epitopes that could protect against all the SARS-CoV-2 viral variants. Also, the vaccine is stable and has a shelf life of 9 months when stored at standard refrigerated temperatures of between 2-8°C. This Editorial aims to present an update on the first approval of a protein-based adjuvanted vaccine for SARS-CoV-2, Nuvaxovid (NVX-CoV2373) from Novavax, and why it is such a significant development at this time.

A stability indicating RP-HPLC method for determination of the COVID-19 drug molnupiravir applied using nanoformulations in permeability studies.

Antiviral drugs have gained much more attention in recent years due to severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) infection and many drug candidates are currently under investigation in order to end pandemic. Molnupiravir, a prodrug of the synthetic nucleoside derivative N4-hydroxycytidine, is one of the promising candidates for SARS-CoV-2 treatment. In this study, a RP-HPLC method was developed for the determination of Molnupiravir and applied for in vitro permeability studies of self-emulsifying drug delivery system (SEDDS) formulations using Caco-2 cell line. Discovery® HS C18 Column (75 ×4.6 mm, 3 µm) was used at 30 °C. Isocratic elution was performed with ACN:water (20:80 v/v) mixture. The flow rate was 0.5 mL/min and UV detection was at 240 nm. Molnupiravir eluted within 5 min. Molnupiravir was exposed to thermal, photolytic, hydrolytic, and oxidative stress conditions. Peak homogeneity data of Molnupiravir in the stressed samples peak obtained using photodiode array detector, in the stressed sample chromatograms, demonstrated the specificity of the method for their estimation in presence of degradants. The developed method was validated according to the International Council for Harmonisation (ICH) guidelines and found to be linear within the range 0.1-60.0 µg/mL. The method was simple, rapid, selective, sensitive, accurate, precise, robust and rugged. Thus, it was applied successfully for permeability quantitation of Molnupiravir in nanoformulations. The apparent permeability of Molnupiravir in SEDDS formulations, which have droplet size under 350 nm, was calculated as 3.20 ± 0.44 × 10-6 cm/s.

Stability of Captisol-enabled versus propylene glycol-based melphalan at room temperature and after refrigeration.

PURPOSE: To compare the chemical stability of Captisol-enabled (CE) melphalan ("CE-melphalan"; Evomela, Acrotech Biopharma LLC) and propylene glycol (PG)-based melphalan ("PG-melphalan"; Alkeran, GlaxoSmithKline) admixtures prepared with 0.9% sodium chloride injection in polyvinyl chloride (PVC) bags or reconstituted vials stored at room temperature (RT) and under refrigeration. METHODS: Lyophilized CE-melphalan and generic PG-melphalan were reconstituted to 5 mg/mL with 0.9% sodium chloride injection or manufacturer-supplied diluent, respectively. The reconstituted vials were then diluted to the desired concentrations with 0.9% sodium chloride injection in PVC bags and were stored at RT (23oC) or under refrigeration (4oC). Aliquots were withdrawn from the bags and reconstituted vials of CE-melphalan and PG-melphalan immediately after preparation and at predetermined time intervals. Melphalan concentrations were measured using a validated high-performance liquid chromatography method. RESULTS: CE-melphalan reconstituted in PVC bags at concentrations of 1 and 2 mg/mL was stable for 6 and 24 hours, respectively, at RT and for 8 and 24 hours, respectively, at 4oC. PG-melphalan reconstituted in bags at 1, 1.5, and 2 mg/mL was stable for 1, 2, and 2 hours, respectively, at RT and for 2, 4, and 4 hours, respectively, at 4oC. Reconstituted CE-melphalan vials were stable for 48 hours at both RT and 4oC, whereas PG-melphalan vials were stable for 6 hours at RT but formed precipitate within 2 hours at 4oC. CONCLUSION: CE-melphalan remained stable longer than generic PG-melphalan under the test conditions. CE-melphalan at 2 mg/mL has 24-hour stability at RT and can be used for extended infusion times or may be compounded ahead of time. Reconstituted CE-melphalan vials are stable for 48 hours at both RT and 4oC.

Opportunities and Challenges for mRNA Delivery Nanoplatforms.

With the global outbreak of SARS-CoV-2, mRNA vaccines became the first type of COVID-19 vaccines to enter clinical trials because of their facile production, low cost, and relative safety, which initiated great advances in mRNA therapeutic techniques. However, the development of mRNA therapeutic techniques still confronts some challenges. First, in vitro transcribed mRNA molecules can be easily degraded by ribonuclease (RNase), resulting in their low stability. Next, the negative charge of mRNA molecules prevents them from direct cell entry. Therefore, finding efficient and safe delivery technology could be the key issue to improve mRNA therapeutic techniques. In this Perspective, we mainly discuss the problems of the existing mRNA-based delivery nanoplatforms, including safety evaluation, administration routes, and preparation technology. Moreover, we also propose some views on strategies to further improve mRNA delivery technology.

Development of highly stable and de-immunized versions of recombinant alpha interferon: Promising candidates for the treatment of chronic and emerging viral diseases.

Human interferon alpha (hIFN-α) administration constitutes the current FDA approved therapy for chronic Hepatitis B and C virus infections. Additionally, hIFN-α treatment efficacy was recently demonstrated in patients with COVID-19. Thus, hIFN-α constitutes a therapeutic alternative for those countries where vaccination is inaccessible and for people who did not respond effectively to vaccination. However, hIFN-α2b exhibits a short plasma half-life resulting in the occurrence of severe side effects. To optimize the cytokine's pharmacokinetic profile, we developed a hyperglycosylated IFN, referred to as GMOP-IFN. Given the significant number of reports showing neutralizing antibodies (NAb) formation after hIFN-α administration, here we applied the DeFT (De-immunization of Functional Therapeutics) approach to develop functional, de-immunized versions of GMOP-IFN. Two GMOP-IFN variants exhibited significantly reduced ex vivo immunogenicity and null antiproliferative activity, while preserving antiviral function. The results obtained in this work indicate that the new de-immunized GMOP-IFN variants constitute promising candidates for antiviral therapy.

Thermostable designed ankyrin repeat proteins (DARPins) as building blocks for innovative drugs.

Designed ankyrin repeat proteins (DARPins) are antibody mimetics with high and mostly unexplored potential in drug development. By using in silico analysis and a rationally guided Ala scanning, we identified position 17 of the N-terminal capping repeat to play a key role in overall protein thermostability. The melting temperature of a DARPin domain with a single full-consensus internal repeat was increased by 8 °C to 10 °C when Asp17 was replaced by Leu, Val, Ile, Met, Ala, or Thr. We then transferred the Asp17Leu mutation to various backgrounds, including clinically validated DARPin domains, such as the vascular endothelial growth factor-binding domain of the DARPin abicipar pegol. In all cases, these proteins showed improvements in the thermostability on the order of 8 °C to 16 °C, suggesting the replacement of Asp17 could be generically applicable to this drug class. Molecular dynamics simulations showed that the Asp17Leu mutation reduces electrostatic repulsion and improves van-der-Waals packing, rendering the DARPin domain less flexible and more stable. Interestingly, this beneficial Asp17Leu mutation is present in the N-terminal caps of three of the five DARPin domains of ensovibep, a SARS-CoV-2 entry inhibitor currently in clinical development, indicating this mutation could be partly responsible for the very high melting temperature (>90 °C) of this promising anti-COVID-19 drug. Overall, such N-terminal capping repeats with increased thermostability seem to be beneficial for the development of innovative drugs based on DARPins.

Antimicrobial and Anticancer Application of Silver(I) Dipeptide Complexes.

Three silver(I) dipeptide complexes [Ag(GlyGly)]n(NO3)n (AgGlyGly), [Ag2(GlyAla)(NO3)2]n (AgGlyAla) and [Ag2(HGlyAsp)(NO3)]n (AgGlyAsp) were prepared, investigated and characterized by vibrational spectroscopy (mid-IR), elemental and thermogravimetric analysis and mass spectrometry. For AgGlyGly, X-ray crystallography was also performed. Their stability in biological testing media was verified by time-dependent NMR measurements. Their in vitro antimicrobial activity was evaluated against selected pathogenic microorganisms. Moreover, the influence of silver(I) dipeptide complexes on microbial film formation was described. Further, the cytotoxicity of the complexes against selected cancer cells (BLM, MDA-MB-231, HeLa, HCT116, MCF-7 and Jurkat) and fibroblasts (BJ-5ta) using a colorimetric MTS assay was tested, and the selectivity index (SI) was identified. The mechanism of action of Ag(I) dipeptide complexes was elucidated and discussed by the study in terms of their binding affinity toward the CT DNA, the ability to cleave the DNA and the ability to influence numbers of cells within each cell cycle phase. The new silver(I) dipeptide complexes are able to bind into DNA by noncovalent interaction, and the topoisomerase I inhibition study showed that the studied complexes inhibit its activity at a concentration of 15 µM.

Bithiazole Inhibitors of Phosphatidylinositol 4-Kinase (PI4KIIIß) as Broad-Spectrum Antivirals Blocking the Replication of SARS-CoV-2, Zika Virus, and Human Rhinoviruses.

Over half a century since the description of the first antiviral drug, "old" re-emerging viruses and "new" emerging viruses still represent a serious threat to global health. Their high mutation rate and rapid selection of resistance toward common antiviral drugs, together with the increasing number of co-infections, make the war against viruses quite challenging. Herein we report a host-targeted approach, based on the inhibition of the lipid kinase PI4KIIIß, as a promising strategy for inhibiting the replication of multiple viruses hijacking this protein. We show that bithiazole inhibitors of PI4KIIIß block the replication of human rhinoviruses (hRV), Zika virus (ZIKV) and SARS-CoV-2 at low micromolar and sub-micromolar concentrations. However, while the anti-hRV/ZIKV activity can be directly linked to PI4KIIIß inhibition, the role of PI4KIIIß in SARS-CoV-2 entry/replication is debated.

Pt-, Rh-, Ru-, and Cu-Single-Wall Carbon Nanotubes Are Exceptional Candidates for Design of Anti-Viral Surfaces: A Theoretical Study.

As SARS-CoV-2 is spreading rapidly around the globe, adopting proper actions for confronting and protecting against this virus is an essential and unmet task. Reactive oxygen species (ROS) promoting molecules such as peroxides are detrimental to many viruses, including coronaviruses. In this paper, metal decorated single-wall carbon nanotubes (SWCNTs) were evaluated for hydrogen peroxide (H2O2) adsorption for potential use for designing viral inactivation surfaces. We employed first-principles methods based on the density functional theory (DFT) to investigate the capture of an individual H2O2 molecule on pristine and metal (Pt, Pd, Ni, Cu, Rh, or Ru) decorated SWCNTs. Although the single H2O2 molecule is weakly physisorbed on pristine SWCNT, a significant improvement on its adsorption energy was found by utilizing metal functionalized SWCNT as the adsorbent. It was revealed that Rh-SWCNT and Ru-SWCNT systems demonstrate outstanding performance for H2O2 adsorption. Furthermore, we discovered through calculations that Pt- and Cu-decorated SWNCT-H2O2 systems show high potential for filters for virus removal and inactivation with a very long shelf-life (2.2 × 1012 and 1.9 × 108 years, respectively). The strong adsorption of metal decorated SWCNTs and the long shelf-life of these nanomaterials suggest they are exceptional candidates for designing personal protection equipment against viruses.

Accelerated stability study of the ester prodrug remdesivir: Recently FDA-approved Covid-19 antiviral using reversed-phase-HPLC with fluorimetric and diode array detection.

Remdesivir (RDV) is the first antiviral drug, approved by the Food and Drug Administration, to treat severe acute respiratory syndrome coronavirus 2. RDV is a relatively new chemical entity, 'ester prodrug', with no reported stability profile. Due to the urgency of its use and thus fast production, it is important to develop a stability-indicating method for its assay. Chromatographic separation was carried out on a C18 column (250 × 4.6 mm, 5 µm) with dual detection: diode array at 240 nm and fluorescence at λex/em 245/390 nm. Isocratic elution of acetonitrile and distilled water (acidified with phosphoric acid, pH 4) in the ratio of 55:45 (v/v), respectively, was used. The linearity range using HPLC-diode array detection was 0.1-15 µg/mL, whereas that using fluorimetric detection was 0.05-15 µg/mL. As per the International Conference on Harmonization guidelines, RDV has been degraded by accelerated alkaline, acidic, neutral hydrolysis, oxidative, heat, and photolytic stress conditions. Possible degradation hypothesis of the parent molecule has been suggested and illustrated. The proposed methods have achieved selective determination of the intact drug with no peaks overlapping in all assumptions. Extensive degradation confirms threatened drug stability at thermal and basic hydrolytic stressing. The developed methods were fully validated and proved suitable for quality control routine analysis of RDV in raw material and pharmaceutical dosage forms.

Development and Validation of a Method for Quantification of Favipiravir as COVID-19 Management in Spiked Human Plasma.

In the current work, a simple, economical, accurate, and precise HPLC method with UV detection was developed to quantify Favipiravir (FVIR) in spiked human plasma using acyclovir (ACVR) as an internal standard in the COVID-19 pandemic time. Both FVIR and ACVR were well separated and resolved on the C18 column using the mobile phase blend of methanol:acetonitrile:20 mM phosphate buffer (pH 3.1) in an isocratic mode flow rate of 1 mL/min with a proportion of 30:10:60 %, v/v/v. The detector wavelength was set at 242 nm. Maximum recovery of FVIR and ACVR from plasma was obtained with dichloromethane (DCM) as extracting solvent. The calibration curve was found to be linear in the range of 3.1-60.0 µg/mL with regression coefficient (r2) = 0.9976. However, with acceptable r2, the calibration data's heteroscedasticity was observed, which was further reduced using weighted linear regression with weighting factor 1/x. Finally, the method was validated concerning sensitivity, accuracy (Inter and Intraday's % RE and RSD were 0.28, 0.65 and 1.00, 0.12 respectively), precision, recovery (89.99%, 89.09%, and 90.81% for LQC, MQC, and HQC, respectively), stability (% RSD for 30-day were 3.04 and 1.71 for LQC and HQC, respectively at -20 °C), and carry-over US-FDA guidance for Bioanalytical Method Validation for researchers in the COVID-19 pandemic crisis. Furthermore, there was no significant difference for selectivity when evaluated at LLOQ concentration of 3 µg/mL of FVIR and relative to the blank.

Facile fabrication of antibacterial and antiviral perhydrolase-polydopamine composite coatings.

In situ generation of antibacterial and antiviral agents by harnessing the catalytic activity of enzymes on surfaces provides an effective eco-friendly approach for disinfection. The perhydrolase (AcT) from Mycobacterium smegmatis catalyzes the perhydrolysis of acetate esters to generate the potent disinfectant, peracetic acid (PAA). In the presence of AcT and its two substrates, propylene glycol diacetate and H2O2, sufficient and continuous PAA is generated over an extended time to kill a wide range of bacteria with the enzyme dissolved in aqueous buffer. For extended self-disinfection, however, active and stable AcT bound onto or incorporated into a surface coating is necessary. In the current study, an active, stable and reusable AcT-based coating was developed by incorporating AcT into a polydopamine (PDA) matrix in a single step, thereby forming a biocatalytic composite onto a variety of surfaces. The resulting AcT-PDA composite coatings on glass, metal and epoxy surfaces yielded up to 7-log reduction of Gram-positive and Gram-negative bacteria when in contact with the biocatalytic coating. This composite coating also possessed potent antiviral activity, and dramatically reduced the infectivity of a SARS-CoV-2 pseudovirus within minutes. The single-step approach enables rapid and facile fabrication of enzyme-based disinfectant composite coatings with high activity and stability, which enables reuse following surface washing. As a result, this enzyme-polymer composite technique may serve as a general strategy for preparing antibacterial and antiviral surfaces for applications in health care and common infrastructure safety, such as in schools, the workplace, transportation, etc.